55kw Versatile Biomass Pellet Production Line - Perfect for Various Biomass Materials and Applications
Product Description:
Sawdust Ring Die Pellet Machine uses rice husks, peanut shells, melon seed shells, bamboo chips, bagasse, palm shells, branches, branches, bark, leaves, wood waste; large furniture factories, wood factories, wood chips produced by various woods in the production process, etc., and process them as raw materials into renewable fuel pellets that will replace coal in the future.
Biomass pellet production line equipment mainly includes the following types:
1. Wood slicer: Cut biomass raw materials such as branches, wood, production or construction scraps into suitable sizes for crushing.
2. Grinder: Grind biomass raw materials such as wood chips, straw, etc. into suitable sizes.
3. Dryer: Dry the pulverized biomass raw material to a suitable moisture content, so as to facilitate better particle formation.
4. Biomass pellet machine: The dried biomass raw material is compressed through the rotation of the ring die to make pellets with a certain density for burning instead of coal and other fuels.
5. Cooling equipment.: Cool the pellets to a suitable temperature for packaging of finished products.
6. Dust removal equipment: In order to avoid dust pollution generated during the production of biomass pellets, dust removal equipment, such as cyclone dust collectors, etc. need to be installed.
7. Packing machine: Automatically weigh and pack the finished particles.
In addition, according to different application fields, you can also choose different types of biomass pellet production line equipment, such as wood pellet machine for wood pellets, straw pellet machine for straw pellets, etc.
In general, the selection of biomass pellet production line equipment needs to be considered comprehensively based on factors such as raw material type, product requirements, and process flow.
Features:
-
① The sawdust pellet machine can produce biomass pellets based on various raw materials such as wood chips, straw, and chaff.
②. Various molding technologies such as cold pressing molding and extrusion molding are adopted, and the oil polishing and shaping process makes the appearance of biomass particles beautiful and the structure relatively compact.
③. The wood pellet machine has high output, low energy consumption, low noise, low failure, strong fatigue resistance, continuous production, economical and durable.
④. The whole machine adopts special high-quality materials and advanced coupling transmission device, and the key components are made of high-quality alloy steel and wear-resistant materials.
⑤. The wood pellet machine mold is placed flat, with the mouth upward, and directly enters the pelletizing mold from top to bottom.
⑥. The specific gravity of wood chips is very light, straight up and down. After the sawdust enters, it is rotated and thrown around by the pressure wheel, and the particles are evenly pressed.
⑦. The sawdust pellet machine is open upward, which is easy to dissipate heat. In addition, it also has a set of air-cooled cloth bag for dust removal and automatic refueling.
⑧. The sawdust pellet machine has a strong enlarged shaft and a large cast steel bearing seat. Its large bearing does not bear any pressure, is not easy to break, and has a long service life.
Technical Parameters:
| Model | LGX700A | lgx600A | LGX600 | LGX560 | LGX450 |
| Power(kw) | 160 | 132 | 110 | 90 | 55 |
| Machine Weight (t) | 8 | 7 | 6.5 | 5.6 | 2.9 |
| inner diameter((MM))) | 700 | 600 | 600 | 560 | 450 |
| Capacity (t/h) | 2.5-3 | 2-2.5 | 1.8-2 | 1.2-1.5 | 0.8-1 |
| package size | 2460*1400*2000 | 2200*1200*1750 | 3100*1300*2100 | 2300*1250*2000 | 2160*1000*1850 |
Applications:
